No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Commands

Common Commands

Viewing All Controllers

Function

View all controllers.

Format

sas3ircu list

Parameters

None

Usage Guidelines

None

Example

# View all controllers.

domino:~# ./sas3ircu list
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

        Adapter       Vendor  Device                      SubSys  SubSys 
Index    Type           ID      ID    Pci Address         Ven ID  Dev ID 
 -----  ------------  ------  ------  -----------------   ------  ------ 
  0     SAS3008        1000h   97h    00h:01h:00h:00h     1000h   3090h 
SAS3IRCU: Utility Completed Successfully.     

Querying RAID Controller Card/Physical Drive Information

Function

View detailed information about RAID controller cards and physical drives.

Format

sas3ircu controller_id display

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

Usage Guidelines

None

Example

# View detailed information about RAID controller cards and physical drives.

  • In this example, two drives are set as Boot and AltBoot respectively.
    domino:~# ./sas3ircu 0 display

Simulating a Drive Fault

Function

Simulate a drive fault.

Format

sas3ircu controller_id action enclosure_id:slot_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

action

Specifies the operation to be performed.

  • setonline
  • setoffline

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Simulate a drive offline fault.

domino:~# ./sas3ircu 0 setoffline 1:2
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Physical disk set to Offline successfully. 
SAS3IRCU: Command SETOFFLINE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

# Simulate a drive online fault.

domino:~# ./sas3ircu 0 setonline 1:2
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Physical disk set to Online successfully. 
SAS3IRCU: Command SETONLINE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Turning On a Drive UID Indicator

Function

Turn on the UID indicator of a specified drive.

Format

sas3ircu controller_id locate enclosure_id:slot_id on

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Turn on the UID indicator of a specified drive.

domino:~# ./sas3ircu 0 locate 1:0 on
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: LOCATE command completed successfully. 
SAS3IRCU: Command LOCATE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 721580

Downloads: 20626

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next