No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Downloading and Installing the MagaCLI Tool

Downloading and Installing the MagaCLI Tool

Downloading the MagaCLI Tool

  1. Log in to the MagaCLI download page at the BROADCOM website.
  2. In the DOWNLOADS area, download the latest MagaCLI tool.
  3. Decompress the downloaded package to obtain the tool packages applicable to different OSs.

Installing the MagaCLI Tool

The installation of the MagaCLI tool varies with the OS you use. The following uses Windows, Linux, and VMware as examples.

The MagaCLI tool for LSI SoftRAID is MegaCLI64.

  • To install MagaCLI on Windows, perform the following steps:
    1. Upload the tool package for Windows to the server OS.
    2. Open the command line tool.
    3. Use the command line tool to go to the directory where the MagaCLI tool package is located.

      The MagaCLI tool can be used to run the RAID controller card commands without installation.

  • To install MagaCLI on Linux, perform the following steps:
    1. Use a file transfer tool (for example, PuTTY) to upload the MagaCLI tool package to the server OS.
    2. Run the rpm -ivh MegaCli -xxx.rpm command to install MagaCLI.

      You can run the RAID controller card commands after the installation is complete.

  • To install MagaCLI on the VMware OS, perform the following steps:
    1. Use a file transfer tool (for example, PuTTY) to upload the MagaCLI tool package to the server OS.
    2. Run the esxcli software vib install -v=vmware-xxx-MagaCLI.vib command to install the MagaCLI tool.

      You can run the RAID controller card commands after the installation is complete.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 747952

Downloads: 20661

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next