No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting an Array

Deleting an Array


When a server does not need an existing array or requires a new array, the existing array configuration must be deleted to release the hard drives.



  • You have created an array.
  • You have performed the operations in 10.3.2 .


You have backed up data in the array to be deleted.


  1. On the configuration tool main screen, select Logical Device Configuration and press Enter.

    The array configuration main screen is displayed, as shown in Figure 10-128.

    Figure 10-128 Array configuration main screen

  2. Select Manage Array and press Enter.

    The array list is displayed, as shown in Figure 10-129.

    Figure 10-129 Array list

  3. Select an array that you want to delete and press Del.

    A confirmation dialog box is displayed.

  4. Select Delete and press Enter.

    A confirmation dialog box is displayed.

  5. Select Yes and press Enter.
  6. Press Esc when prompted to exit the configuration screen.
  7. Restart the server.
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 807679

Downloads: 20772

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next