No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing Foreign Configurations

Importing Foreign Configurations

Scenarios

  • A newly installed hard drive may already have a storage configuration (considered as foreign configuration). You can import the foreign configuration to the controller card on the Configuration Utility.
  • After replacing a RAID controller card on a server, perform this operation to import the original configuration information to the new RAID controller card.
  • To restore a RAID array after a member drive is hot swapped, set the drive to UGOOD and import the foreign configuration.
  • If the number of faulty or missing hard disks exceeds the maximum number allowed by the RAID group, the RAID group cannot be imported.
  • To avoid configuration import failure, replace the original RAID controller card with a new card of the same type.

Procedure

Access the Configuration Utility main screen

  1. Log in to the server through a remote virtual console and can manage the server on a real-time basis. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.

Importing Foreign Configurations

  1. If foreign configuration is detected, information shown in Figure 4-167 is displayed on the Configuration Utility screen.
    Figure 4-167 Foreign configuration
  1. Click Preview.

    The Foreign Configuration Preview screen is displayed.

    Figure 4-168 Foreign Configuration Preview screen
  2. Click Import.
  3. After the import is complete, check the imported configuration in the Logical View area on the right of the Configuration Utility main screen.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 745220

Downloads: 20657

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next