No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Commands

Common Commands

Viewing All Controllers

Function

View all controllers.

Format

sas3ircu list

Parameters

None

Usage Guidelines

None

Example

# View all controllers.

domino:~# ./sas3ircu list
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

        Adapter       Vendor  Device                      SubSys  SubSys 
Index    Type           ID      ID    Pci Address         Ven ID  Dev ID 
 -----  ------------  ------  ------  -----------------   ------  ------ 
  0     SAS3008        1000h   97h    00h:01h:00h:00h     1000h   3090h 
SAS3IRCU: Utility Completed Successfully.     

Viewing Device Information

Function

View detailed information about RAID controller cards, physical drives, and virtual drives.

Format

sas3ircu controller_id display

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

Usage Guidelines

None

Example

# View detailed information about RAID controller cards, physical drives, and virtual drives.

  • In this example, two drives are set as Boot and AltBoot respectively.
    domino:~# ./sas3ircu 0 display

  • In this example, a drive is set as Boot and a RAID array is set as AltBoot.
    domino:~# ./sas3ircu 0 display

Creating and Deleting a RAID Array

Function

Create and delete a RAID array. (The delete command will delete all RAID arrays.)

Format

sas3ircu controller_id create RAIDlevel capacity enclosure_id:slot_id name noprompt

sas3ircu controller_id delete noprompt

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

level

Specifies the target RAID level.

-

capacity

Specifies the target RAID array capacity.

The value can be MAX, which indicates that the RAID array capacity is set to the maximum.

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

name

Specifies a RAID array name.

Set by the user.

Usage Guidelines

None

Example

# Create a RAID array.

domino:~# ./sas3ircu 0 create RAID1 MAX 1:0 1:1 Test01 noprompt
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS3IRCU: Volume created successfully. 
SAS3IRCU: Command CREATE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

# Create a RAID array.

domino:~# ./sas3ircu 0 create RAID1 MAX 1:2 1:3 Test01 noprompt
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS3IRCU: Volume created successfully. 
SAS3IRCU: Command CREATE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

# Delete RAID arrays.

domino:~# ./sas3ircu 0 delete noprompt
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS3IRCU: Volume deleted successfully. 
SAS3IRCU: Command DELETE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Deleting a Specified RAID Array

Function

Delete a specified RAID array.

Format

sas3ircu controller_id deletevolume volume_id noprompt

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

volume_id

Specifies the ID of the RAID array to be deleted.

-

Usage Guidelines

None

Example

# Delete the RAID array whose ID is 322.

domino:~# ./sas3ircu 0 deletevolume 322 noprompt
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS3IRCU: Volume deleted successfully. 
SAS3IRCU: Command DELETEVOLUME Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Simulating a Drive Fault

Function

Simulate a drive fault.

Format

sas3ircu controller_id action enclosure_id:slot_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

action

Specifies the operation to be performed.

  • setonline
  • setoffline

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Simulate a drive offline fault.

domino:~# ./sas3ircu 0 setoffline 1:2
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Physical disk set to Offline successfully. 
SAS3IRCU: Command SETOFFLINE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

# Simulate a drive online fault.

domino:~# ./sas3ircu 0 setonline 1:2
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Physical disk set to Online successfully. 
SAS3IRCU: Command SETONLINE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Creating and Deleting a Hot Spare Drive

Function

Create and delete a hot spare drive.

Format

sas3ircu controller_id hotspare enclosure_id:slot_id

sas3ircu controller_id hotspare delete enclosure_id:slot_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Create a hot spare drive.

domino:~# ./sas3ircu 0 hotspare 1:2
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

WARNING: Proceeding with this operation may cause data loss or data  
         corruption. Are you sure you want to proceed (YES/NO)?yes 
WARNING: This is your last chance to abort this operation. Do you wish  
         to abort (YES/NO)?no 
Please wait,may take up to a minute... 
SAS3IRCU: Hot Spare disk created successfully. 
SAS3IRCU: Command HOTSPARE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

# Delete a hot spare drive.

domino:~# ./sas3ircu 0 hotspare delete 1:2
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

WARNING: Proceeding with this operation may cause data loss or data  
         corruption. Are you sure you want to proceed (YES/NO)?yes 
WARNING: This is your last chance to abort this operation. Do you wish  
         to abort (YES/NO)?no 
Please wait,may take up to a minute... 
SAS3IRCU: Hot Spare disk deleted successfully. 
SAS3IRCU: Command HOTSPARE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.     

Viewing Virtual Drive Status

Function

View virtual drive status.

Format

sas3ircu controller_id status

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

Usage Guidelines

None

Example

# View virtual drive status.

domino:~# ./sas3ircu 0 status
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Background command progress status for controller 0... 
IR volume 1 
  Volume ID                              : 323 
  Current operation                      : Background Init 
  volume Status                          : Enabled 
  Volume state                           : Optimal 
  Volume wwid                            : 0307b565aa18c1fb 
  Physical disk I/Os                     : Not quiesced 
  Volume size (in sectors)               : 1560545280 
  Number of remaining sectors            : 1558128640 
  Percentage complete                    : 0.15% 
IR volume 2 
  Volume ID                              : 323 
  Current operation                      : none 
  volume Status                          : Enabled 
  Volume state                           : Optimal 
  Volume wwid                            : 09fb6da3d1048925 
  Physical disk I/Os                     : Not quiesced 
SAS3IRCU: Command STATUS Completed Successfully. 
SAS3IRCU: Utility Completed Successfully. 

Performing a Consistency Check

Function

Perform a consistency check.

Format

sas3ircu controller_id constchk volume_id noprompt

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

volume_id

Specifies the ID of a RAID array.

-

Usage Guidelines

None

Example

# Perform a consistency check.

domino:~# ./sas3ircu 0 constchk 322 noprompt
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Consistency Check Operation started on IR Volume. 
SAS3IRCU: Command CONSTCHK Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Activating a RAID Array

Function

Activate a RAID array.

Format

sas3ircu controller_id activate volume_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

volume_id

Specifies the ID of the RAID array to be activated.

-

Usage Guidelines

None

Example

# Activate the RAID array whose ID is 322.

domino:~# ./sas3ircu 0 activate 322
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: ACTIVATE Volume 322 Passed! 
SAS3IRCU: Command ACTIVATE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Turning On a Drive UID Indicator

Function

Turn on the UID indicator of a specified drive.

Format

sas3ircu controller_id locate enclosure_id:slot_id on

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Turn on the UID indicator of a specified drive.

domino:~# ./sas3ircu 0 locate 1:0 on
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: LOCATE command completed successfully. 
SAS3IRCU: Command LOCATE Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Collecting and Clearing RAID Array Event Logs

Function

Collect and clear RAID array event logs.

Format

sas3ircu controller_id logir upload name

sas3ircu controller_id logir clear

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

name

Specifies a log file name.

Set by the user.

Usage Guidelines

None

Example

# Collect RAID array event logs and save them to the local file FW.log.

domino:~# ./sas3ircu 0 logir upload FW.log
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: LogIR command successful. 
SAS3IRCU: Command LOGIR Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

# Delete RAID array event logs.

domino:~# ./sas3ircu 0 logir clear
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

WARNING: proceeding with this operation will erase all log information 
         stored in th controller. Are you sure you want to proceed (YES/NO)? yes 
SAS3IRCU: LogIR command successful. 
SAS3IRCU: Command LOGIR Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Setting a Specified RAID Array as the First Boot Device

Function

Set a specified RAID array as the first boot device.

Format

sas3ircu controller_id bootir volume_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

volume_id

Specifies the ID of the target RAID array.

-

Usage Guidelines

None

Example

# Set the RAID array whose ID is 322 as the first boot device.

domino:~# ./sas3ircu 0 bootir 322
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Command BOOTIR Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Setting a Specified Drive as the First Boot Device

Function

Set a specified drive as the first boot device.

Format

sas3ircu controller_id bootencl enclosure_id:slot_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Set a specified drive as the first boot device.

domino:~# ./sas3ircu 0 bootencl 1:4
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Command BOOTENCL Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Setting a Specified RAID Array as the Second Boot Device

Function

Set a specified RAID array as the second boot device.

Format

sas3ircu controller_id bootir volume_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

volume_id

Specifies the ID of the target RAID array.

-

Usage Guidelines

None

Example

# Set a specified RAID array as the second boot device.

domino:~# ./sas3ircu 0 altbootir 322
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Command ALTBOOTIR Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.

Setting a Specified Drive as the Second Boot Device

Function

Set a specified drive as the second boot device.

Format

sas3ircu controller_id altbootencl enclosure_id:slot_id

Parameters

Parameter

Description

Value

controller_id

Specifies the ID of a RAID controller card.

-

enclosure_id

Specifies the ID of the enclosure where the drives are installed.

-

slot_id

Specifies a slot number.

-

Usage Guidelines

None

Example

# Set a specified drive as the second boot device.

domino:~# ./sas3ircu 0 bootencl 1:4
Avago Technologies SAS3 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS3IRCU: Command BOOTENCL Completed Successfully. 
SAS3IRCU: Utility Completed Successfully.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 712436

Downloads: 20606

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next