No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Virtual Drive Information

Viewing Virtual Drive Information

Procedure

  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. On the Adapter Properties screen, select RAID Properties and press Enter.
  3. Select View Existing Volume and press Enter.
  4. Existing RAID arrays are displayed, as shown in Figure 6-46. Table 6-13 describes the parameters on this screen.

    Figure 6-46 View Volume screen
    Table 6-13 Parameters

    Parameter

    Description

    Volume

    Number of the RAID array. The LSI SAS3008IR supports up to two RAID arrays.

    Identifier

    RAID array name.

    Type

    RAID array level.

    Size

    RAID array capacity.

    Status

    RAID array status.

    Task

    Task of the RAID array.

    None indicates that the RAID array does not have running tasks in the background.

    Slot Num

    Slot number of a hard drive.

    Device Identifier

    Hard drive name.

    RAID Disk

    Indicates whether the hard drive is a member of the RAID array.

    • Yes: The hard drive is a member of the RAID array.
    • No: The hard drive is not a member of the RAID array.

    Hot Spr

    Indicates whether the drive is a hot spare drive.

    • Yes: The hard drive is a global hot spare drive.
    • No: The hard drive is not a global hot spare drive.

    Drive Status

    Drive status.

    Pred Fail

    Indicates whether the hard drive is to be identified as failed by the controller card.

    • Yes: The hard drive is to be identified as failed by the RAID controller card and you need to replace it.
    • No: The hard drive is working properly.

    Disk Size

    Hard drive capacity.

    If the LSI SAS3008IR has more than one RAID array, press Alt+N to view information about other RAID arrays.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 718608

Downloads: 20614

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next