No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disk Utilities

Disk Utilities

On the Disk Utilities screen, you can view the hard drive list, format hard drives, and turn on hard drive indicators.

Screen Introduction

On the Configuration Utility main screen as shown in Figure 11-29, select Disk Utilities. The hard drive list is displayed.

Select the hard drive to be operated and press Enter. The hard drive operation screen is displayed, as shown in Figure 11-110. Table 11-35 describes the parameters displayed on the screen.

Figure 11-110 Hard drive operation screen

Table 11-35 Parameter description

Parameter

Description

Blink LED

Turns on hard drive indicators.

Erase Disk

Formats a hard drive. It takes a long time because all data on the hard drive will be deleted.

Turn on the indicator.

  1. Select Blink LED and press Enter.

    The LED operation list is displayed.

    • Continue: Turn on the indicator for locating the server.
    • Stop: Turn off the indicator.

  2. Select Continue and press Enter.

Format a hard drive.

  1. Select Erase Disk.

    The operation confirmation screen is displayed.

  2. Select Continue and press Enter.

    The system displays a message indicating that the formatting starts.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 706441

Downloads: 20585

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next