No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hard Drive Hot Spares

Hard Drive Hot Spares

A hot spare drive is used to replace a failed member drive of a RAID array and store data of the failed drive.

The LSI SoftRAID supports a maximum of six hot spare drives. If one or two member drives of the same type as hot spare drives fail, hot spare drives take over data processing to prevent data loss or fault deterioration.

For details about how to configure hot spare drives, see Configuring a Hot Spare Drive.

The HDDs and SSDs cannot be used as the hot spare drives of each other.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 709189

Downloads: 20601

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next