No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disk Utilities

Disk Utilities

On the Disk Utilities screen, you can check the current hard drives, format hard drives, and turn on/off indicators on hard drives.

Screen Introduction

On the Configuration Utility main screen as shown in Figure 11-3, select Disk Utilities. The hard drive list is displayed, as shown in Figure 11-95.

Select a hard drive and press Enter. Table 11-24 describes the parameters displayed on the screen.

Figure 11-95 Hard drive list

Table 11-24 Parameter description

Parameter

Description

Secure Erase

Formats the hard drive. It takes a long time because all data on the hard drive will be deleted.

Identify Drive

Locating the hard drive.

Locating a Hard Drive

  1. Select a hard drive and press Enter.
  2. Select Identify Drive from the displayed menu.

    You can press any key to turn off the hard drive indicator.

Formatting a Hard Drive

  1. Select a hard drive and press Enter.
  2. Select Secure Erase from the displayed menu.

    A confirmation dialog box is displayed.

  3. Select Yes and press Enter.

    The hard drive formatting progress is displayed.

    You can stop the formatting by pressing Alt+A.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 757615

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next