No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Expanding the Available Space of a Virtual Drive

Expanding the Available Space of a Virtual Drive

Scenarios

If a virtual drive does not occupy the entire capacity of all its member hard drives, you can expand the virtual drive capacity by adjusting the available virtual drive space.

Procedure

  1. Back up data on hard drives and access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. Expand the available space of a virtual drive.

    1. On the VD Mgmt tab, select the virtual drive to be expanded.
    2. Press F2 and choose Expand VD Size from the shortcut menu.
      Figure 8-61 Expanding a virtual drive
    3. On the screen displayed, set the percentage of available capacity.

      The expansion percentage is the percentage of the remaining capacity.

      Figure 8-62 Setting the percentage of available capacity
    4. Select Resize and press Enter.

      The Configuration Utility main screen is displayed.

  3. Check the configuration result.

    On the VD Mgmt tab, view the configuration result.
    Figure 8-63 Configuration result

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 760330

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next