No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rebuilding and Copyback

Rebuilding and Copyback

If a member drive of a RAID array becomes faulty, a hot spare drive automatically replaces the failed drive and starts data synchronization. Once the faulty drive has been replaced with a newly installed data drive, data is copied from the hot spare drive to the new data drive. When the data copyback is complete, the hot spare drive will restore back to its hot spare state.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 759783

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next