No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Configuration Utility

Logging In to the Configuration Utility

Impact on the System

Before accessing the Configuration Utility main screen, you need to restart the server, which will interrupt services running on the server.

Procedure

  1. Set the LEGACY mode. For details, see Setting the Legacy Mode.
  2. Log in to the PM8060 Configuration Utility.

    1. During the server startup, If Press <Ctrl><A> for PMC RAID Configuration Utility is displayed, press Ctrl+A.

      The Configuration Utility screen is displayed, as shown in Figure 10-4. Table 10-4 describes parameters displayed on the Configuration Utility screen.

    Figure 10-4 Main screen
    Table 10-4 Parameter description

    Parameter

    Description

    Logical Device Configuration

    Creates or deletes arrays, configures the array properties, initializes, erases, and scans hard drives, and sets the boot device.

    Controller Setting

    Sets RAID controller card properties, non-simultaneous power-on specifications, and RAID controller card time, and checks the status of the supercapacitor.

    Disk Utilities

    Checks the current hard drives and performs illuminating, formatting, and data checking for specific hard drives.

Additional Information

Related Tasks

You can check such information as controller firmware versions, PCIe slots, capacitors, hard drives connected to controllers, and created RAIDs, before the server is restarted and the RAID configuration screen is entered.

Figure 10-5 Controller information

Related Concepts

None

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 717904

Downloads: 20614

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next