No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Configuration Utility in EFI mode (Grantley or Romley Platform)

Logging In to the Configuration Utility in EFI mode (Grantley or Romley Platform)

Scenarios

The method of logging in to the Configuration Utility in EFI mode varies with the BIOS platform.

This section describes how to log in to the LSI SAS2308 Configuration Utility in EFI mode on the Romley platform.

Impact on the System

Before accessing the Configuration Utility, you need to restart the server, which will interrupt services on the server.

Prerequisites

Conditions

You have logged in to the real-time desktop through the remote virtual console of the management software (iMana 200 or iBMC).

Data

Data preparation is not required for this operation.

Procedure

  1. During the restart process, press F11 when information shown in Figure A-2 is displayed.

    Figure A-2 BIOS boot screen

  2. Type the password and press Enter.

    The screen is displayed in Figure A-3.

    Boot information about various servers may be different. Go to the Boot Manager screen as prompted.

    The default password for logging in to the BIOS Setup screen is Huawei12#$.

    Figure A-3 Boot Manager

  3. Press Esc.

    The manager list is displayed, as shown in Figure A-4.

    Figure A-4 Manager list

  4. Select Device Manager and press Enter.

    The Device Manager screen is displayed, as shown in Figure A-5.

    The displayed information varies with the RAID controller card.

    Figure A-5 Device Manager

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 709875

Downloads: 20605

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next