No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Virtual Disk Management Screen

Virtual Disk Management Screen

Figure 6-102 shows the screen. Table 6-33 describes the operations on the screen.

Figure 6-102 Virtual Disk Management screen
Table 6-33 Operations

Operation

Description

Manage Virtual Disk Properties

Displays and modifies virtual drive properties, and configures hot spare drives.

Select Virtual Disk Operations

Displays or deletes the virtual drive.

Manage Virtual Disk Properties Screen

Figure 6-103 shows the screen. Table 6-34 describes the parameters on the screen.

Figure 6-103 Manage Virtual Disk Properties screen

Table 6-34 Parameter description

Parameter

Description

Select Virtual Disk

Selects a virtual drive.

Virtual Disk ID

ID of the virtual drive.

RAID Level

RAID level of the virtual drive.

Virtual Disk Status

Status of the virtual drive.

Virtual Disk Capacity

Capacity of the virtual drive.

Virtual Disk Policies

Virtual drive read and write policies.

View Associated Physical Disks

Displays properties of associated physical drives.

Manage Global Hotspare Disks

Manages hot spare drives.

Viewing Member Drive Properties

  1. On the screen shown in Figure 6-103, select View Associated Physical Disks and press Enter.

    Figure 6-104 shows the screen. Table 6-35 describes the parameters on the screen.

    Figure 6-104 View Associated Physical Disks

    Table 6-35 Parameter description

    Parameter

    Description

    Selected Virtual Disk

    Selected virtual drive.

    Associated Physical Disks

    Member drive list.

  2. Use and to select a member drive and press Enter.
  3. Select Enabled and press Enter.
  4. Use and to select View Physical Disk Properties and press Enter.

    The physical drive property screen shown in Figure 6-105 is displayed.

    Figure 6-105 Physical drive properties

  5. Use and to select View More Physical Disk Properties and press Enter.

    More physical drive properties are displayed, as shown in Figure 6-106. Table 6-36 describes the parameters on the screen.

    Figure 6-106 More physical drive properties
    Table 6-36 More physical drive properties

    Parameter

    Description

    Select Physical Disk

    Selects a physical drive.

    Physical Disk ID

    ID of the physical drive.

    State

    Status of the physical drive.

    Revision

    Version of the physical drive.

    Device Type

    Device type.

    SAS Address

    SAS address of the physical drive.

    Disk Cache Setting

    Caching enablement status of the physical drive.

    Size

    Capacity of the physical drive.

    Disk Protocol

    Physical drive type.

    Serial Number of Disk

    Serial number of the physical drive.

    Hardware Vendor

    Vendor of the physical drive.

    Model Number

    Model number of the physical drive.

    Hard Disk Drive RPM

    Rotation speed of the physical drive.

    Neg. Disk Transfer Speed

    Transmission rate of the physical drive.

    View More Physical Disk Properties

    More properties of the physical drive.

    SMART Status

    SMART information.

    Hotspare

    Specifies whether the physical drive is a hot spare drive.

    Associated Virtual Disk

    Virtual drive to which the physical drive belongs.

Configuring a Hot Spare Drive

  1. On the screen shown in Figure 6-103, select Manage Global Hotspare Disks and press Enter.

    Figure 6-107 shows the screen. Table 6-37 describes the parameters on the screen.

    Figure 6-107 Manage Global Hotspare Disks

    Table 6-37 Parameter description

    Parameter

    Description

    Selected Virtual Disk

    Selected virtual drive.

    Compatible Bare Disks

    Lists physical drives that can be configured as hot spare drives.

    Global Hotspare Disks

    Lists existing hot spare drives.

    Assign Global Hotspare Disk

    Sets the drive as a global hot spare drive.

    Unassign Global Hotspare Disk

    Deletes the selected hot spare drives.

  2. Use and to select a physical drive and press Enter.
  3. Select Enabled and press Enter.
  4. Select the physical drive status to Disabled again.
  5. Use and to select Assign Global Hotspare Disk and press Enter.

    The message "Operation complete successfully" is displayed.

  6. Press Enter.

    The configuration is complete.

Deleting a Hot Spare Drive

  1. On the screen shown in Figure 6-107, use ↑ and ↓ to select a hot spare drive and press Enter.
  2. Select Enabled and press Enter.
  3. Select the physical drive status to Disabled again.
  4. Use and to select Unassign Global Hotspare Disk and press Enter.

    The message "Operation complete successfully" is displayed.

  5. Press Enter.

    The configuration is complete.

Select Virtual Disk Operations Screen

Figure 6-108 shows the screen. Table 6-38 describes the parameters on the screen.

Figure 6-108 Select Virtual Disk Operations screen
Table 6-38 Parameter description

Parameter

Description

Select Virtual Disk

Selects a virtual drive.

Start Locate / Blink

Turns on the UID indicator of a member drive of the virtual drive.

Stop Locate / Blink

Turns off the UID indicator of a member drive of the virtual drive.

Delete Virtual Disk

Deletes the virtual drive.

Operation in Progress

Ongoing operation.

Operation Pending

Operation waiting for execution.

Allowed Operations

Operations that can be performed.

Operation Progress (%)

Operation progress.

Is Operation in Progress

Specifies whether an operation is in process.

Start Operation

Starts to perform an operation.

Turning On the UID Indicator

  1. Use and to select Start Locate / Blink and press Enter.

Deleting the Virtual Drive

  1. Use and to select Delete Virtual Disk and press Enter.

    A confirmation screen is displayed.

  2. Use and to select Confirm and press Enter.
  3. Use and to select Yes and press Enter.

    The message "Operation complete successfully" is displayed.

  4. Press Enter.

    The configuration is complete.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 704900

Downloads: 20579

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next