No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Exit Menu

Exit Menu

Press Esc to exit the LSI SAS3008IT Configuration Utility. The screen shown in Figure 7-17 is displayed.

Use and to select an operation and press Enter.

Figure 7-17 Exit screen

Table 7-8 describes the operation options.

Table 7-8 Operations



Cancel Exit

Cancels the exit.

Save changes and reboot

Saves the changes and restarts the server.

Discard changes and reboot

Discards the changes and restarts the server.

Exit the Configuration Utility and Reboot

Exits the Configuration Utility and restarts the server.

Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 745143

Downloads: 20657

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next