No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Hard Drive Properties

Configuring Hard Drive Properties


View and modify hard drive properties as required.


  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. On the Configuration Utility main screen, choose Objects > Physical Drive and press Enter.

    The hard drive list is displayed, as shown in Figure 9-52.

    Figure 9-52 Hard drive list

  3. Select the hard drive to be queried or configured, and press Enter.

    The hard drive operation menu is displayed, as shown in Figure 9-53.

    Figure 9-53 Hard drive operation menu

  4. Set hard drive properties.

    Use and to select an operation and press Enter. Table 9-12 describes the operations.

    Table 9-12 Operations for hard drives



    Make Hot Spare

    Configures the hard drive as a global hot spare drive.

    Force Online

    Forcibly makes the failed hard drive online.

    Change Drv State

    Changes the hard drive status.

    Drive Properties

    Displays hard drive properties, including the hard drive type, storage space, asset serial number, version, and rate.

  5. Press Esc to exit the hard drive list.
  6. Press Esc to exit the Configuration Utility main screen.
  7. Restart the server.
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 706513

Downloads: 20586

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next