No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Configuration Utility

Logging In to the Configuration Utility

Impact on the System

You need to restart the server before logging in to the Configuration Utility main screen. Services running on the server are interrupted.

Procedure

  1. Set the EFI mode. For details, see Setting the EFI/UEFI Mode.
  2. Log in to the Configuration Utility screen of the LSI SAS3108.

    The position of the RAID controller card management interface in EFI/UEFI mode varies with the BIOS platform.

  3. Select the LSI SAS3108 and press Enter.

    The main screen is displayed, as shown in Figure 8-35. Table 8-14 describes the parameters on the screen.

    Figure 8-35 LSI SAS3108 main screen
    Table 8-14 Parameter description

    Parameter

    Description

    Main Menu

    Main menu of the controller card. All operations are available.

    Help

    Help information.

    Status

    Current status of the controller card.

    Backplane

    Number of backplanes.

    BBU

    Installation status of the supercapacitor.

    Enclosure

    Number of hard disk backplanes.

    Drives

    Number of hard drives.

    Drive Groups

    Number of drive groups.

    Virtual Drives

    Number of virtual drives.

    View Server Profile

    Displays and manages RAID controller card properties.

    View Foreign Configuration

    Displays and manages a foreign configuration.

    Configure

    Deletes a configuration.

    Set Factory Default

    -

    Update Firmware

    Upgrades firmware.

    NOTE:

    Not supported on the LSI SAS3108.

    Silence Alarm

    Unavailable.

    The controller card is not configured with a buzzer.

    Virtual Drive Operations in Progress

    Ongoing background operations on virtual drives.

    Drive Operations in Progress

    Ongoing background operations on hard drives.

    MegaRAID xxx

    Displays advanced properties.

    Manage MegaRAID Advanced Software Options

    Manages advanced properties.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 721115

Downloads: 20622

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next