No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating RAID 1E

Creating RAID 1E

Scenarios

  • Data on a hard drive will be deleted after the hard drive is added to a RAID array. Before creating a RAID array, check that there is no data on hard drives or the data on hard drives is not required. If the hard disk data needs to be retained, back up the data first.
  • The LSI SAS2308 supports SAS/SATA HDDs and SSDs. Hard drives in one RAID array must be of the same type, but can have different capacities or be provided by different vendors.
  • RAID 0, 1, 10, and 1E lists the number of hard drives required by each RAID level.

Procedure

  1. Backed up data on hard drives and access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. Log in to the Create Configuration screen.

    1. On the main screen, select Main Menu and press Enter. Select Controller Management and press Enter.
    2. Select Create Configuration and press Enter.

  3. Select a RAID level.

    1. Use and to select Select RAID Level and press Enter.

      The list of configurable RAID levels are displayed.

      Figure 5-29 Selecting a RAID level

    2. Select RAID 1E and press Enter.

  4. Select member drives.

    1. Use and to select Select Physical Disks and press Enter.

      The hard drive selection screen is displayed, as shown in Figure 5-29. Table 5-12 describes the parameters on the screen.

      Figure 5-30 Selecting hard drives

      Table 5-12 Parameter description

      Parameter

      Description

      Selected RAID Level

      Indicates the selected RAID level.

      Select Interface Type

      Selects an interface type. If the controller card controls hard drives of different interface types, you can use this parameter to filter the hard drives.

      Select Media Type

      Selects a hard drive type. If the controller card controls hard drives of different capacities, you can use this parameter to filter the hard drives.

      0:2:0 SATS HDD-512b 3726 GB

      Indicates the selectable hard drives.

      NOTE:

      If there are multiple hard drives, multiple hard drive records are displayed.

      Check All

      Selects all listed hard drives.

      Uncheck All

      Deselects all hard drives.

    2. Select member drives by referring to Table 5-12.
      • A RAID1E can contain three, five, seven, or nine hard drives (odd numbers).
      • If the total number of hard drives in all RAID arrays under a RAID controller card exceeds 14, no hard drive can be added to RAID arrays.

  5. Save the settings.

    1. Use and to select Apply Changes and press Enter.

      A confirmation screen is displayed.

      Figure 5-31 Confirmation screen

    2. Use and to select Confirm and press Enter.

      The drive status changes to [X].

    3. Use and to select Yes and press Enter.

      The message "Operation completed successfully" is displayed.

    4. Select OK and press Enter.

      The configuration is complete.

  6. Check the configuration result.

    1. On the main screen, select Virtual Disk Management and press Enter.
    2. Select Manage Virtual Disk Properties and press Enter.

      Current RAID information is displayed.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 717515

Downloads: 20614

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next