No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Downloading and Installing SAS3IRCU

Downloading and Installing SAS3IRCU

Downloading SAS3IRCU

  1. Go to the RAID controller card screen at the BROADCOM website.
  2. On the DOWNLOADS tab page, click Management Software and Tools.

    The management software and tools list is displayed.

  3. Download SAS3IRCU of the latest version.
  4. Decompress the downloaded file to obtain the tool packages for different operating systems (OSs).

Installing SAS3IRCU

The SAS3IRCU installation method varies depending on the OS type. The following uses Windows, Linux, and VMware as examples to describe the SAS3IRCU installation procedure. For the installation procedures for other OSs, see the Readme file in the software package.

  • Installing SAS3IRCU in Windows
    1. Upload the tool package applicable to Windows to the server OS.
    2. Go to the command-line interface (CLI).
    3. Run a command to go to the directory where the SAS3IRCU tool package resides.

      For Windows, SAS3IRCU does not require installation. You can directly run RAID controller card management commands.

  • Installing SAS3IRCU in Linux
    1. Use a file transfer tool (for example, PuTTY) to upload the SAS3IRCU package applicable to Linux to the server OS.
    2. Go to the directory where SAS3IRCU resides in shell mode.

      For Linux, SAS3IRCU does not require installation. You can directly run RAID controller card management commands.

  • Installing SAS3IRCU in VMware

    When installing SAS3IRCU in the VMware OS, you must use the RAID card driver issued by Huawei instead of the RAID card driver of the OS.

    1. Use a file transfer tool (for example, PuTTY) to upload the SAS3IRCU package applicable to VMware to the server OS.
    2. Run the esxcli software vib install -v=vmware-xxx-sas3ircu.vib command to install SAS3IRCU.

      When the installation is complete, you can run RAID controller card management commands.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 757625

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next