Physical Disk Management Screen
Figure 7-21 shows the screen. Table 7-11 describes the parameters on the screen.
View Physical Disk Properties Screen
Figure 7-22 shows the screen. Table 7-12 describes the parameters on the screen.
Parameter |
Description |
|---|---|
Select Physical Disk |
Selects a physical drive. |
Physical Disk ID |
ID of the physical drive. |
State |
Status of the physical drive. |
Revision |
Version of the physical drive. |
Device Type |
Device type. |
SAS Address |
SAS address of the physical drive. |
Disk Cache Setting |
Caching enablement status of the physical drive. |
Size |
Capacity of the physical drive. |
Disk Protocol |
Physical drive type. |
Serial Number of Disk |
Serial number of the physical drive. |
Unit Serial Number(VPD) |
Unit serial number (VPD) of the physical drive. |
Hardware Vendor |
Vendor of the physical drive. |
Model Number |
Model of the physical drive. |
Hard Disk Drive RPM |
Rotation speed of the physical drive. |
Neg. Disk Transfer Speed |
Transmission rate of the physical drive. |
View More Physical Disk Properties |
More properties of the physical drive. |
SMART Status |
SMART information. |
Hotspare |
Specifies whether the physical drive is a hot spare drive. |
Associated Virtual Disk |
Virtual drive to which the physical drive belongs. |
Select Physical Disk Operations Screen
Figure 7-23 shows the screen.
Locating a Hard Drive
- Use ↑ and ↓ to select Select Physical Disk and press Enter.
- Select a physical drive and press Enter.
- Use ↑ and ↓ to select Start Locate / Blink and press Enter.
Previous
