No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a hot spare drive

Deleting a hot spare drive

Scenarios

If the number of existing hard drives in the current environment is insufficient, you can delete an existing hot spare drive so that it restores to a common hard drive.

Procedure

  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. On the screen shown in Figure 11-3, select Logical Device Configuration and press Enter.

    The Logical Device Configuration screen is displayed.

    Figure 11-60 Logical Device Configuration

  3. Select Manage Arrays and press Enter.

    The array list is displayed.

    Figure 11-61 Array list

  4. Select the array to be operated and press Delete.

    The hot spare drive list is displayed.

    Figure 11-62 hot spare drive list

  5. In the Select Hotspare drives area, select the target hot spare drive and press the space or Insert key.

    The selected hot spare drive is displayed in the Selected Drives area.

  6. Press Enter.

    A confirmation dialog box is displayed.

  7. Enter Y and press Enter.

    Figure 11-61 is displayed.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 760782

Downloads: 20691

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next