No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting an Array

Deleting an Array




Data preparation is not required for this operation.


Enter the array management screen.

  1. On the displayed screen, select Array Configuration and press Enter.

    The Array Configuration screen is displayed.

    Figure 11-77 Array Configuration

  2. Select Manage Array LD.

    The RAID array list is displayed.

  3. Select the array to be operated and press Enter. The array operation list is displayed.
    Figure 11-78 Array operation list

    Delete an array.

  4. On the screen shown in Figure 11-78, select Delete Array and press Enter.

    Exit the Configuration Utility.

  5. Press Esc to return to the Boot Manager screen.
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 706858

Downloads: 20592

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next