No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Increasing Available RAID Space

Increasing Available RAID Space

Scenarios

The capacity of a RAID array can be expanded using either of the following methods:

  • Adding hard drives: Add new hard drives to an existing RAID array.
  • Increasing available space: If the capacity of all member hard drives in a RAID array is not fully utilized, increase the percentage of available space of the RAID array.

Prerequisites

Conditions

The following conditions must be met before you increase the available space of a RAID array:

  • Member hard drives of the RAID array have available space.
  • You have logged in to the server through a remote virtual console and can manage the server on a real-time basis.
  • You have accessed the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.

Data

Data preparation is not required for this operation.

Procedure

  1. On the left of the Configuration Utility main screen, select Virtual Drives.

    The virtual drive selection screen is displayed.

    Figure 4-159 Virtual drive selection screen
  2. Select Properties and click Go.

    The virtual drive property screen is displayed.

    Figure 4-160 Virtual drive properties
  3. Select Expand under Operations, and click Go.

    The capacity expansion screen is displayed.

    Figure 4-161 Capacity expansion
  4. Enter the percentage of the available space to be increased, and click OK.
  5. Click Home to go back to the Configuration Utility main screen.
  6. On the right of the Configuration Utility main screen, view the RAID configuration and check the capacity expansion result.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 721540

Downloads: 20626

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next