No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Configuration Utility

Logging In to the Configuration Utility

Impact on the System

Before accessing the Configuration Utility main screen, you need to restart the server, which will interrupt services running on the server.

Procedure

Set the LEGACY mode. For details, see Setting the Legacy Mode.

Log in to the PM8068 Configuration Utility.

  1. During the server startup, if Press <Ctrl><A>for PMC RAID Configuration Utility is displayed, press Ctrl+A.

    The Configuration Utility screen is displayed, as shown in Figure 11-79. Table 11-15 describes the parameters displayed on the screen.

Figure 11-79 Main screen

Table 11-15 Parameter description

Parameter

Description

Logical Device Configuration

Creates or deletes arrays, configures array properties, and sets the boot device.

Controller Setting

Configures RAID controller card properties.

Disk Utilities

Queries the current hard drives, formats hard drives, and turns on/off indicators on hard drives.

Additional Information

Related Tasks

During the server restart, before entering the RAID configuration screen, you can check information including the firmware version of the current controller card and PCIe slots.

Figure 11-80 Controller information

Related Concepts

None

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 719511

Downloads: 20619

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next