No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting an Array

Deleting an Array

Scenarios

When a server does not need an existing array or requires a new array, delete the existing array configuration to release the hard drives.

Prerequisites

Conditions

Data

Data in the array to be deleted has been backed up.

Procedure

Enter the array property management screen.

  1. On the Controller Operations main screen, select Logical Device Configuration and press Enter.

    The Logical Device Configuration screen is displayed, as shown in Figure 10-145.

    Figure 10-145 Logical Device Configuration screen

  2. Select Manage Arrays and press Enter.

    The array list is displayed, as shown in Figure 10-146.

    Figure 10-146 Array list

  3. Select the array to be deleted and press Enter.

    The array operation list is displayed, as shown in Figure 10-147.

    Figure 10-147 Operation list

    Delete an array.

  4. Select Delete Array and press Enter.

    A confirmation dialog box is displayed.

  5. Press Enter.

    The Logical Drive Deletion success message is displayed.

  6. Press any key to return to the screen shown in Figure 10-146.

    Exit the Configuration Utility.

  7. Press Esc to return to the Boot Manager screen.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 759953

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next