No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Hot Spare Drive

Deleting a Hot Spare Drive

Scenarios

The following two methods can be used to delete a hot spare drive in the PM8060:

  • Initializing the hard drive on the Configuration Utility.
  • Using the arcconf tool.

Using the Configuration Utility

Initialize the hot spare drive to be deleted on the Configuration Utility. For details, see Initialize Drives or Uninitialize Drives.

Using the CLI

Prerequisites

Conditions

You have downloaded and installed the arcconf tool on the operating system.

Data

Data preparation is not required for this operation.

Tools

The arcconf tool provided by PMC has been installed on the OS.

Procedure

  1. Open the arcconf tool in the operating system.
  2. Run the configuration command:

    Syntax: arcconf setstate controller ID device channel id device id RDY

    Parameters in the command are described as follows:

    • controller ID: indicates the controller ID.
    • channel id: indicates the channel ID of the hot spare drive to be deleted. The default value is 0.
    • device id: indicates the slot ID of the hot spare drive to be deleted.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 744734

Downloads: 20655

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next