No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing RAID Controller Card Properties

Viewing RAID Controller Card Properties

Procedure

  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. Access the Controller Management screen.

    1. On the main screen, select Main Menu and press Enter.
    2. Select Controller Management, and press Enter.

      The basic information about the controller card is displayed, as shown in Figure 8-113. Table 8-34 describes the parameters.

      Figure 8-113 Controller Management
      Table 8-34 Parameter description

      Parameter

      Description

      Product Name

      Name of the controller.

      Serial Number

      Serial number of the controller.

      Controller Status

      Operating status of the controller.

      Select Boot Device

      Current boot device.

      NOTE:

      This boot option applies only to the Legacy mode. For details about how to configure the boot option for the EFI/UEFI mode, see Configuring Boot Options.

      PCI ID

      PCI ID of the controller.

      PCI Slot Number

      PCI slot number of the controller.

      Package Version

      Package version of the controller.

      Firmware Version

      Firmware version of the controller.

      NVDATA Version

      Controller configuration version.

      Connector Count

      Number of controller connectors for connecting to the mainboard.

      Drive Count

      Number of hard drives mounted to the controller.

      Virtual Drive Count

      Number of virtual drives that can be managed by the controller.

      Advanced Controller Management

      Further operations on the controller.

      Advanced Controller Properties

      Displays and modifies advanced controller properties.

  3. View advanced controller properties.

    1. Select Advanced Controller Properties and press Enter.

      The advanced controller properties screen is displayed, as shown in Figure 8-114. Table 8-35 describes the parameters.

      You can view and modify the advanced properties of the controller card on this screen.

      Figure 8-114 Advanced Controller Properties
    Table 8-35 Parameter description

    Parameter

    Description

    Cache and Memory

    Cache and memory information about the controller.

    Patrol Read

    Patrol Read feature.

    Power Save Setting

    Drive sleep mode.

    Spare

    Hot spare status.

    Task Rates

    Handling speed of various tasks.

    Alarm Controller

    Unavailable. The controller card is not configured with a buzzer.

    Auto Import Foreign Configuration

    Automatically imports foreign configurations.

    Boot Mode

    Options when the controller BIOS detects an exception:

    • Stop On Errors (default): stops startup and continues with startup only when user confirms.
    • Pause on Errors: suspends startup and continues with startup even if the user does not confirm after a set period.
    • Ignore Errors: continues startup. This option is usually for system diagnosis.
    • Safe Mode on Errors: enters safe startup mode.

    Controller BIOS

    BIOS status.

    ROC Temperature

    Controller temperature.

    Shield State Supported

    Support I/O interruption during hard drive diagnosis.

    The default value is Yes.

    Drive Security

    Status of hard drive encryption.

    T10-PI

    Status of information protection technology.

    Expanded Virtual Drive Support

    Support for virtual drive expansion.

    Maintain Drive Fail History

    Status of drive failure history.

    SMART Polling

    SMART polling interval.

    Stop Consistency Check on Error

    Status of consistency check in case of errors.

    JBOD Mode

    Status of the pass-through mode.

    NOTE:

    JBOD can be configured only when the controller card firmware version is 4.650.00-6121 or later and the server has been installed with the driver matching the firmware version.

    Write Verify

    -

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 749780

Downloads: 20661

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next