No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Capacity Expansion

Capacity Expansion

The two types of capacity expansion are:

  • Adding hard drives: Adds new hard drives to an existing array for capacity expansion.
  • Increasing available array space: Increases the percentage of available space of an array for capacity expansion if the capacity of all member drives in the array is not fully utilized.

To use the capacity expansion function, you must install the official arcconf tool released by PMC. For details about how to perform capacity expansion using the arcconf tool, see relevant documents downloaded from the PMC official website.

Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 721709

Downloads: 20626

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next