No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Consistency Check

Consistency Check

You can manually perform a data consistency check for RAID arrays with redundancy (for example, RAID 1, 10, and 1E). If data inconsistency is detected, the system automatically recovers data and saves error information to the bad block table.

Before performing a consistency check, ensure that RAID initialization is complete. For details about how to perform a consistency check, see Checking Consistency.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 705461

Downloads: 20581

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next