No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SAS Topology Menu

SAS Topology Menu

This menu allows you to view the topology of hard drives controlled by the LSI SAS3008IT, view the details about a single drive, format and verify hard drives, and set a hard drive as the first boot device.

Screen Overview

Figure 7-12 shows the SAS Topology screen.

Use and to select an item and press Enter.

Figure 7-12 SAS Topology screen

Table 7-4 describes the parameters on the screen.

Table 7-4 Parameters

Parameter

Description

Device Identifier

Device name.

Device Info

Device information.

Lighting Up Hard Drive Indicators

Select a hard drive and press Enter.

The indicators of the selected hard drive are on.

Formatting and Verifying a Hard Drive

Select a hard drive and press ALT+D.

The Device Properties screen of the selected hard drive is displayed and provides menus for formatting and verifying the hard drive, as shown in Figure 7-13.

  • Format: formats a hard drive.
  • Verify: displays the hard drive health status, which indicates whether there are damaged or bad sectors.
    Figure 7-13 Device Properties screen
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 720843

Downloads: 20622

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next