No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing or Deleting a Foreign Configuration

Importing or Deleting a Foreign Configuration

Scenarios

  • After replacing a RAID controller card, import the original configuration to the new RAID controller card.
  • If a hard drive newly installed on a server already has a RAID configuration that the user needs or does not need, you can import or delete the configuration.
  • If you replace a RAID controller card when a RAID array has been configured on the server, the RAID configuration will be considered as Foreign Config. If you clear a foreign configuration, the RAID configuration will be lost. Exercise caution when performing this operation.
  • If the number of faulty or missing hard disks exceeds the maximum number allowed by the RAID group, the RAID group cannot be imported.
  • To avoid configuration import failure, replace the original RAID controller card with a new card of the same type.

Procedure

  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. View foreign configurations.

    Press Ctrl+P to switch to the Foreign View tab.

    If foreign configurations exist, the Foreign View tab is displayed on the Configuration Utility, as shown in Figure 8-67.

    Figure 8-67 Foreign configuration

  3. Import or delete a foreign configuration.

    1. Select a RAID controller card and press F2.
      Figure 8-68 Available operations
    2. Choose Import or Clear as required, and press Enter.
    3. On the VD Mgmt tab, view the operation result.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 714260

Downloads: 20610

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next