No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controller Management Screen

Controller Management Screen

Figure 7-18 shows the screen. Table 7-9 describes the operations on the screen.

Figure 7-18 Controller Management screen

Table 7-9 Operations



View Controller Properties

Displays LSI SAS3008IT properties.

Change Controller Properties

Changes LSI SAS3008IT properties.

View Controller Properties Screen

This screen shows the LSI SAS3008IT controller properties.

Screen Overview

Figure 7-19 shows the screen. Table 7-10 describes the parameters on the screen.

Figure 7-19 Controller Properties screen

Table 7-10 Parameter description



Chip Name

Name of the controller.

Chip Version

Version information of the controller.


PCI address of the controller. Format: bus number:device number:function number

PCI Slot Number

PCI slot number of the controller.

  • For KunLun 9016, the value ranges from 0 to 3.
    • 0: primary enclosure of SCE 1.
    • 1: secondary enclosure of SCE 1.
    • 2: primary enclosure of SCE 2.
    • 3: secondary enclosure of SCE 2.
  • For KunLun 9032, the value ranges from 0 to 7.
    • 0: primary enclosure of SCE 1.
    • 1: secondary enclosure of SCE 1.
    • 2: primary enclosure of SCE 2.
    • 3: secondary enclosure of SCE 2.
    • 4: primary enclosure of SCE 3.
    • 5: secondary enclosure of SCE 3.
    • 6: primary enclosure of SCE 4.
    • 7: secondary enclosure of SCE 4.

Host Interface

Interface type of the controller.

Physical Disk Count

Number of physical drives mounted to the controller.

Virtual Disk Count

Number of virtual drives mounted to the controller.

Firmware Type

Firmware type of the controller.

Firmware Version

Firmware version of the controller.

Default NVData Version

Version of default NVData.

Persistent NVData Version

Version of persistent NVData.

Change Controller Properties

If the OS has insufficient processing capability, you can use this screen to set the resource usage rate of RAID rebuild.

Screen Overview

Figure 7-20 shows the screen.

Figure 7-20 Change Controller Properties
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 748684

Downloads: 20661

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next