No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
View Server Profile

View Server Profile

This screen allows you to perform management operations.

Screen Overview

The View Server Profile screen is displayed, as shown in Figure 8-220. Table 8-74 describes the parameters on the screen.

Figure 8-220 View Server Profile

Table 8-74 Parameter description



UEFI Spec Version

UEFI specification version supported by the server.

Controller Management

Manages controllers. For details, see Controller Management Screen.

Hardware Components

Manages controller components. For details, see Hardware Components.

Drive Management

Manages hard drives. For details, see Drive Management.

Virtual Drive Management

Manages virtual drives. For details, see Virtual Drive Management.

Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 705995

Downloads: 20585

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next