No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Hot Spare Drive

Deleting a Hot Spare Drive


If the number of member hard drives in a RAID array is insufficient, you can delete a hot spare drive to enable it to function as a common hard drive.


  1. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  2. Delete a hot spare drive.

    1. On the Adapter Properties screen, select RAID Properties and press Enter.

      The Select New Volume Type screen is displayed, as shown in Figure 6-39.

      Figure 6-39 Select New Volume Type screen
    2. Select View Existing Volume and press Enter.

      The View Volume screen is displayed, as shown in Figure 6-40.

      Figure 6-40 View Volume screen
    3. Select Manage Volume and press Enter.

      The Manage Volume screen is displayed.

      Figure 6-41 Manage Volume screen
    4. Select Manage Hot Spares and press Enter.

      The Manage Hot Spares screen is displayed.

    5. Delete a hot spare drive.

      When the target hot spare drive is selected, press - or the space bar to mark the drive as a deleted hot spare drive, as shown in Figure 6-42.

      In the Hot Spr column, No indicates that the hard drive is not a hot spare drive.

      Figure 6-42 Deleting hot spare drives
    6. Press C.

      The hot spare drive configuration update screen is displayed.

    7. Select Save changes then exit this menu and press Enter.

      After the configuration is complete, the Figure 6-41 screen is displayed.

Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 757498

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next