No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Initialization

Initialization

The two types of initialization are:

  • Initialize Drives: initializes a specified drive to the Ready state.

Drives in the Ready state can be used as RAID member drives or initialized into pass-through drives in the Raw state.

  • Secure Erase Drives: securely erases and thoroughly formats a specified drive, which takes a long time.
  • Secure ATA Erase: securely erases and thoroughly formats a specified SATA drive, which takes a long time.
  • Uninitialize Drives: initializes a specified drive to the Raw state.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 817509

Downloads: 20848

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next