No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Virtual Drives Menu

Virtual Drives Menu

This menu allows you to view and modify virtual drive properties, and delete or create a virtual drive.

Screen Introduction

Figure 4-231 shows the Virtual Drives screen.

Figure 4-231 Virtual Drives screen

In the Virtual Drives pane, virtual drives are displayed in the Virtual drive number:RAID type:Virtual drive capacity:Virtual drive status format.

A virtual drive can be in either of the following states:

  • Optimal: The virtual drive is in optimal operating status.
  • Initialize: The virtual drive is being initialized.

Fast Initialization

Fast initialization will cause data loss. Exercise caution when performing this operation.

  1. In the Virtual Drives pane, select Fast Initialize and click Go.

    The Confirm Page screen is displayed.

  2. Click Yes.

    The fast initialization of the virtual drive starts.

    Figure 4-232 Fast initialization screen

    After the initialization, the virtual drive status changes to Optimal in the Virtual Drives pane.

Slow Initialization

Slow initialization will cause data loss. Exercise caution when performing this operation.

  1. On the Virtual Drives screen, select Slow Initialize and click Go.

    The Confirm Page screen is displayed.

  2. Click Yes.

    The slow initialization of the virtual drive starts.

    Figure 4-233 Slow initialization screen

  3. After the initialization, the virtual drive status changes to Optimal in the Virtual Drives pane.

Consistency Check

  1. On the Virtual Drives screen, select Check Consistency and click Go.

    The Confirm Page screen is displayed.

  2. Click Yes.

    The consistency check screen starts.

    Figure 4-234 Consistency check screen

    The RAID controller card automatically corrects data errors or verification code errors detected in redundant data. Back up all data before performing a consistency check.

  3. After the consistency check, the virtual drive status changes to Optimal in the Virtual Drives pane.

Viewing Virtual Drive Properties

  1. On the Virtual Drives screen, select Properties and click Go.

    The virtual drive properties screen is displayed. For details, see Virtual Drives Menu.

Configuring a Boot Drive

  1. On the Virtual Drives screen, choose a virtual drive to be configured as the boot drive, select Set Boot Drive, and click Go.

    After the configuration, current=None following Set Boot Drive changes to current=N (N indicates the virtual drive ID).

    Figure 4-235 Configuring a boot drive

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 760787

Downloads: 20691

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next