No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a RAID Array

Deleting a RAID Array

Scenarios

The LSI SoftRAID management software provides two methods for deleting a RAID array.

  • Thorough deletion: deletes all RAID arrays.
  • Directed deletion: deletes the specified RAID array.

Procedure

Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.

Thorough Deletion

  1. On the Configuration Utility main screen, choose Configure > Clear Configuration and press Enter.

    A confirmation dialog box is displayed.

  2. Select Yes and press Enter to delete all RAID configurations.
  3. Press Esc to exit the configuration menu.

    Directed Deletion

  4. On the Configuration Utility main screen, choose Objects > Virtual Drive and press Enter.

    The virtual drive list is displayed, as shown in Figure 9-57.

    Figure 9-57 Selecting a virtual drive
  5. Select the virtual drive to be deleted and press Del.

    A confirmation dialog box is displayed.

  6. Select Yes and press Enter to delete the selected RAID configuration.
  7. Press Esc to exit the virtual drive selection screen.

    Exit the Configuration Utility.

  8. Press Esc to exit the Configuration Utility main screen.
  9. Restart the server.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 759536

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next