No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Obtaining the Tool

Obtaining the Tool

Downloading StorCLI

  1. Go to the RAID controller card page at the BROADCOM website.
  2. On the DOWNLOADS tab page, click Management Software and Tools.

    The management software and tools list is displayed.

  3. Download MegaRAID Storcli of the latest version.
  4. Decompress the downloaded file to obtain the tool packages for different operating systems (OSs).

Installing StorCLI

The StorCLI installation method varies depending on the OS type. The following uses Windows, Linux, and VMware as examples to describe the StorCLI installation procedure. For the installation procedures for other OSs, see the Readme file in the software package.

The StorCLI tool supported by LSI SAS2208 is storcli64.

  • Installing StorCLI in Windows
    1. Upload the tool package applicable to Windows to the server OS.
    2. Go to the command-line interface (CLI).
    3. Run a command to go to the directory where the StorCLI tool package resides.

      For Windows, StorCLI does not require installation. You can directly run RAID controller card management commands.

  • Installing StorCLI in Linux
    1. Use a file transfer tool (for example, PuTTY) to upload the StorCLI package applicable to Linux to the server OS.
    2. Run the rpm -ivh StorCLIxxx.rpm command to install StorCLI.

      When the installation is complete, you can run RAID controller card management commands.

  • Installing StorCLI in VMware
    1. Use a file transfer tool (for example, PuTTY) to upload the StorCLI package applicable to VMware to the server OS.
    2. Run the esxcli software vib install -v=vmware-xxx-storcli.vib command to install StorCLI.

      When the installation is complete, you can run RAID controller card management commands.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 707581

Downloads: 20599

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next