No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a RAID Array

Deleting a RAID Array

Scenarios

Delete the existing RAID array configuration to release hard drives when a RAID array is not required or a new RAID array needs to be configured.

Procedure

  1. Log in to the server through a remote virtual console and can manage the server on a real-time basis.
  2. Access the Configuration Utility main screen. For details, see Logging In to the Configuration Utility.
  3. Back up data on the RAID array to be deleted.
  4. Delete a RAID array.

    1. On the left of the Configuration Utility main screen, select Virtual Drives.

      The virtual drive selection screen is displayed.

      Figure 4-175 Virtual drive selection screen

    2. Select Properties and click Go.

      The virtual drive property screen is displayed.

      Figure 4-176 Virtual drive properties

    3. Select Delete under Operations, and click Go.

      A message is displayed, asking you whether to delete the RAID array.

    4. Click Yes.
    5. After the RAID array is deleted, the Configuration Utility main screen is displayed.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 719519

Downloads: 20619

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next