No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Events Menu

Events Menu

This menu allows you to view information about system events.

Screen Introduction

Figure 4-276 shows the Events screen. Table 4-79 describes the parameters on the screen.

Figure 4-276 Event Information screen (1)

Table 4-79 Parameters

Parameter

Description

First Sequence #

First sequence number.

Last Sequence #

Last sequence number.

Event Locale

Entity where an event occurs.

Event Class

Event severity.

Start Sequence #

Start sequence number.

# of Events (Max 248 at a time)

Number of events (a maximum of 248 events at a time).

Event Handling

  1. Select an operation and click Go.

    Event information is displayed in the right pane of the screen, as shown in Figure 4-277. Table 4-80 describes the parameters on the screen.

    Figure 4-277 Event Information screen (2)
    Table 4-80 Parameters

    Parameter

    Description

    Sequence #

    Sequence number.

    Time Stamp #

    Time when an event occurs.

    Class

    Event severity.

    Locale

    Entity where an event occurs.

    Virtual Drive Target ID

    ID of a target virtual drive.

    Virtual Drive Index

    Virtual drive ID.

    Description

    Details about an event.

  2. View event information.

    Click Next to view the next event and click Prev to view the previous event.

  3. Click Home.

    The Configuration Utility main screen is displayed.

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 714261

Downloads: 20610

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next