No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Configuration Utility

Logging In to the Configuration Utility

Impact on the System

You need to restart the server before logging in to the Configuration Utility main screen, which will interrupt services running on the server.


  1. Configure EFI Boot Type. For details, see Setting the EFI/UEFI Mode.
  2. Log in to the PM8068 Configuration Utility.

    The RAID controller card management interface position in EFI/UEFI mode varies with the BIOS platform.

  3. Select Huawei BC11ESMS and press Enter.

    The PM8068 configuration screen is displayed, as shown in Figure 11-27. Table 11-9 describes the parameters displayed on the screen.

    Figure 11-27 PM8068 configuration screen
    Table 11-9 Parameter description



    Controller Information

    Queries RAID controller card properties.

    Controller Configuration

    Manages RAID controller card configurations.

    Array Configuration

    Configures and manages arrays.

    Disk Utilities

    Configures and manages hard drives.


    Manages RAID controller card firmware.

Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 754935

Downloads: 20680

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next