No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RAID 0, 1, 5, 6, 10, 50, and 60

RAID 0, 1, 5, 6, 10, 50, and 60

The controller card supports up to:

  • 32 or 240 hard drives (The LSI SAS3108 supports two types of RAID keys, which support 32 and 240 hard drives respectively).

    The hard drives supported include the number of hot spare drives, idle drives (drives in Unconfigured Good state), and the number of drives in RAID arrays.

  • 64 virtual drives, specified by Virtual Drive on the Configuration Utility.
  • 64 drive groups, specified by Drive Group on the Configuration Utility. Each drive group holds up to 32 or 240 hard drives and 16 virtual drives (specified by Virtual Drive).

RAID 0, 1, 5, 6, 10, 50, and 60 lists the supported RAID levels and quantity of hard drives.

Table 8-3 Supported RAID levels and quantity of hard drives

RAID Level

Total Hard Drives


Total Hard Drives per Span

Maximum Failed Drives


1 to 32





Even numbers from 2 to 32

Number of spans


3 to 32



3 to 32



240 and even numbers from 4 to 32

2 to 8 RAID 1

32 and even numbers from 2 to 16

Number of spans


6 to 32/240

2 to 8 RAID 5

3 to 16/32

Number of spans


6 to 32/240

2 to 8 RAID 6

3 to 16/32

Total spans x 2

  • The failed hard drives cannot be adjacent. For details, see RAID Levels.
  • A RAID array consists of multiple spans. For example, a RAID 50 array consists of two RAID 5 spans.
  • Each span of a RAID 10 and 50 array allows for only one failed drive.
  • Each span of a RAID 60 array allows for a maximum of two failed drives.
  • The number of hard drives supported by RAID 10, 50, and 60 varies depending on the configured key type.
  • On a Windows hard drive management screen, Bus Type of virtual drives and JBOD drives for the LSI SAS3108 is RAID.
  • The number of hard drives in RAID 10, 50, and 60 is determined by the number of spans and the number of hard drives supported by each span.
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 707103

Downloads: 20593

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next