No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rebuilding RAID Data

Rebuilding RAID Data

If a member drive of a RAID array is faulty, RAID data rebuild is required regardless of its replacement by a new hard drive or a hot spare drive.

This rebuild happens by default when an appropriate hard drive is available, unless the RAID controller card property Auto Rebuild is set to Disable.

Screen Description

On the Main Menu screen, select a drive under the Drive Management node and press Enter to display the drive operation menu, as shown in Figure 4-188. Table 4-50 describes the operations that are available.

Figure 4-188 Drive Management operation menu

Table 4-50 Drive Group available operations



Select operation

Selects the operation to be performed.

Start Locate

Locates the hard drive.

Stop Locate

Stops locating the hard drive.


Rebuilds a RAID.

  • Suspend
  • Stop

Place Drive Online

Enables the hard drive to be online.

Prepare For Removal

Prepares for removing the hard drive.

Mark Drive as Missing

Deletes the offline hard drive from the RAID array.

Rebuilding RAID Data

  1. On the menu, choose Rebuild and press Enter.

    The Rebuild menu is displayed.

  2. Select an operation type and press Enter.

    A confirmation dialog box is displayed.

  3. Select Yes and press Enter.
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 716419

Downloads: 20612

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next