No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

The LSI SAS3008IT controller card is a 12 Gbit/s SAS controller with the Fusion-MPT™ architecture. (MPT refers to Message Passing Technology.) Equipped with PCIe 3.0 x8 ports and a powerful I/O storage engine, the controller card handles data protection, verification, and restoration.

The LSI SAS3008IT provides the 3 Gbit/s, 6 Gbit/s, and 12Gbit/s SAS ports and 3 Gbit/s and 6 Gbit/s SATA ports, with each port supporting the SSP, SMP, and STP.

The LSI SAS3008 IT controller card supports out-of-band management and transparent transmission but does not support RAID functions. Out-of-band management tools, such as the iBMC, can be used to manage RAID controller cards and attached hard drives, and RAID array configuration and operations are not supported.

The LSI SAS3008IT has two structures to provide ease of connection in different servers:

  • LSI SAS3008IT for a rack, X8000, X6800 or X6000 V3 server

    The LSI SAS3008IT connects to the mainboard through an Xcede connector and connects to the hard drive backplane by using two Mini-SAS cables, as shown in Figure 7-1.

  • LSI SAS3008IT for a blade, X6000 V2, G560, or mission-critical server

    The LSI SAS3008IT connects to the mainboard through two Xcede connectors, as shown in Figure 7-2.

Figure 7-1 LSI SAS3008IT for a rack, X8000, X6800 or X6000 V3 server

1

RAID controller card

2

Mini-SAS port

3

Xcede connector

-

-

Figure 7-2 LSI SAS3008IT for a blade, X6000 V2, G560, or mission-critical server

1

RAID controller card

2

Xcede connector

Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 720841

Downloads: 20622

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next