No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei V2 and V3 Server RAID Controller Card User Guide 36

This document describes the appearances and features of the redundant array of independent disks (RAID) controller cards, how to configure properties for the RAID controller cards, and how to install drivers. The RAID controller cards include the LSI SAS2208, LSI SAS2308, LSI SAS3008, LSI SAS3108, LSI SoftRAID, PM8060, and PM8068.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hard Drive Hot Spares

Hard Drive Hot Spares

Hot spare drives are used to replace member drives in an array and take over data on faulty member drives.

The PM8060 supports a maximum of two hot spare drives. When one or two member drives of the same type as hot spare drives fail, they are replaced by hot spare drives to prevent data loss or fault deterioration.

  • The HDDs and SSDs cannot be used as the hot spare drives of each other.
  • The HDDs include SAS HDDs and SATA HDDS. If the member drives of a RAID array are SAS drives, the SATA drives can be used as dedicated hot spare drives. If the member drives are SATA drives, the SAS drives cannot be used as dedicated hot spare drives.
Translation
Download
Updated: 2019-11-01

Document ID: EDOC1000004186

Views: 760545

Downloads: 20686

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next