No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH2288 V2 Server V100R002C00 User Guide 19

This document describes the RH2288 V2 in terms of its features, appearance, technical specifications, and procedures of installing, powering on, and powering off the RH2288 V2, connecting cables, and installing an operating system (OS) for it.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the RH2288 V2 in terms of its features, appearance, technical specifications, and procedures of installing, powering on, and powering off the RH2288 V2, connecting cables, and installing an operating system (OS) for it.

This document assumes that the readers have adequate knowledge about the server products and get enough training, and therefore no injury to the human body or damage to devices is caused during the maintenance.

Intended Audience

This document is intended for:

  • Technical support personnel

  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

19

2019-08-05

This is the nineteenth official release.

18

2017-11-26

Modified mainboard layout description.

Added the BIOS startup screen.

17

2017-07-26

The PCIe slot layout is added.

16

2016-07-30

The procedure for replacing an integrated battery backup unit (iBBU) is modified.

15

2015-12-09

The power cable installation direction is modified.

14

2015-11-06

The figure that shows the cable connections to the rear hard disk backplane is modified.

13

2015-10-31

The packing list description is modified.

12

2015-03-28

The parameter of noise is updated.

11

2014-09-16

The product name is updated.

10

2014-06-16

The parameter of the operating humidity and storage humidity is updated.

09

2014-04-28

The description of installing the OS is updated.

08

2014-02-10

The procedure for installing the jumper cap is updated.

07

2013-12-13

The description of the NIC is updated.

The description of the CPU is updated.

The description of RAID controller card is updated.

06

2013-09-03

The description of the Ivy Bridge CPU compliance is added.

The description of the fan speed adjustment policy is added.

The description of the NVDIMM using policy is added.

05

2013-05-30

The procedure for setting the NSCI function is added.

The procedure for powering on or powering off the server with iMana WEB is added.

The procedure for installing the server is updated.

The specification of the server is updated.

04

2013-01-30

The document is updated based on trouble tickets.

The weight and power are updated.

The default information and China Environmental Labeling yearly check information are added.

03

2012-10-18

The document is updated based on trouble tickets.

The procedure for setting the PXE function of an NIC is added.

The front and rear views of the 12-disk and 24-disk configurations are added.

02

2012-08-30

The document is updated based on trouble tickets.

The 24-disk configurations are added.

The default BIOS login password and the procedure for changing the password are added.

01

2012-02-29

This is the first official release.

Translation
Download
Updated: 2019-08-08

Document ID: EDOC1000004196

Views: 23963

Downloads: 2110

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next