2FE (2-Port-FE WAN Interface Card)

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

2FE (2-Port-FE WAN Interface Card)

Card Overview

The 2FE is a high-speed Ethernet WAN access module and provides two FE electrical interfaces. It can connect to a WAN at the rate of 100 Mbit/s.

A 2FE card can be installed in a SIC slot of a router.

Figure 7-57 shows the appearance of a 2FE card.

Figure 7-57 2FE card appearance

Version Mapping

Table 7-139 lists the device models and software versions supporting the 2FE.

Table 7-139 Version mapping

Card Name	Device Model
2FE NOTE: This card is supported in V200R001C00 and later versions.	AR1200 series (All models in this series except the AR1220E, AR1220EV, and AR1220EVW) AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE) AR3200 series AR3600 series

Card Name

Device Model

2FE

NOTE:

This card is supported in V200R001C00 and later versions.

AR1200 series (All models in this series except the AR1220E, AR1220EV, and AR1220EVW)

AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE)

AR3200 series

AR3600 series

Functions and Features

Table 7-140 describes the functions and features of a 2FE card.

Table 7-140 Functions and features

Function and Feature	Description
Two FE electrical interfaces	The 2FE can connect to a WAN at the rate of 100 Mbit/s to provide Layer 3 services.
Two FE electrical interfaces	Two FE electrical interfaces can comprise an uplink interface at the line speed of 200 Mbit/s.
Layer 3 protocols	IPv4, IPv6, and MPLS.

Panel

Figure 7-58 shows the indicators on a 2FE card, and Table 7-141 describes the indicator states and meanings.

Figure 7-58 Indicators on a 2FE card
Click to enlarge

Table 7-141 Indicator description

Number	Indicator	Color	Description
1	STAT	Green	Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting.
		Red	Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually.
		Off	Off: The software is not running or is being reset.
2	ACT	Yellow	Blinking: Data is being transmitted or received.
2	ACT	Yellow	Off: No data is being transmitted or received.
3	LINK	Green	Steady on: A link has been established.
3	LINK	Green	Off: No link is established.

Figure 7-59 shows the interfaces on a 2FE card.

Figure 7-59 Interfaces on a 2FE card
Click to enlarge

1. Two FE electrical interfaces

FE electrical interface

An FE electrical interface (10/100 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 7-142 lists attributes of an FE electrical interface.

Table 7-142 FE electrical interface attributes

Attribute	Description
Connector type	RJ45
Interface attribute	MDI/MDIX NOTE: MDI stands for medium dependent interface, an Ethernet interface connection mode. Ethernet interfaces of most network adapters are MDI interfaces. MDIX stands for medium dependent interface crossover, a version of MDI. MDIX interfaces are usually used on hubs or LAN switches.
Standards compliance	PoE-capable FE electrical interface: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, and IEEE802.3at PoE-incapable FE electrical interface: IEEE802.3, IEEE802.3u, and IEEE802.3ab
Frame format	Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol	IP
Cable type	Ethernet Cable

Technical Specifications

Table 7-143 lists the technical specifications of a 2FE card.

Table 7-143 Technical specifications

Item	Specifications
Card type	SIC
Hot swap	Supported
Physical specifications	Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.) Maximum power consumption: 4 W Weight: 0.3 kg (0.66 lb)
Environment parameters	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% to 95%, noncondensing Storage temperature: -40°C to +70°C (-40°F to +158°F) Operating altitude: 0 to 5000 m (16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-144 provides 2FE card ordering information.

Table 7-144 Ordering information

Part Number	Model	Name Label (Silkscreen)	Description
03020XTQ	AR0MSEF2TA00	2FE	2-Port FE WAN Interface Card

Card Overview
Version Mapping
Functions and Features
Panel
Technical Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2023-08-08

Document ID: EDOC1000009848

Downloads: 19201

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate