No relevant resource is found in the selected language.
Enterprise
Worldwide
Search
Support Documentation
AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
2X10GL (2-Port 10GE Optical Ports Interface Card)

2X10GL (2-Port 10GE Optical Ports Interface Card)

Card Overview

The 2X10GL is a high-speed WAN access module that provides two 10GE optical interfaces for high-speed uplink connection.

A 2X10GL card can be installed in a WSIC or XSIC slot of a router.

Figure 7-60 shows the appearance of a 2X10GL card.

Figure 7-60 2X10GL card appearance

Version Mapping

Table 7-145 lists the device models and software versions supporting the 2X10GL.

Table 7-145 Version mapping

Card Name

Device Model

2X10GL

NOTE:

This card is supported in V200R007C00 and later versions.

When this card is used on a router, the minimum bandwidth and maximum bandwidth supported by the card are both 10 Gbit/s, due to the backplane bandwidth restriction.

AR2240

NOTE:
  • When a AR2240 router uses the SRU40, SRU60, SRU80, or SRU100 main control unit, this card can be installed in slots 7 and 8.
  • When a AR2240 router uses the SRU100E or SRU200E main control unit, this card can be installed in slot 8.
  • When a AR2240 router uses the SRU200 or SRU400 main control unit, this card can be installed in slots 5 to 8.

AR3260

NOTE:
  • When a AR3260 router uses the SRU40, SRU60, SRU80, SRU100, SRU100E, or SRU200E main control unit, this card can be installed in slots 8 and 10.
  • When a AR3260 router uses the SRU200 or SRU400 main control unit, this card can be installed in slots 5 to 10.

AR3670

NOTE:

When a AR3670 router uses the SRUX5 main control unit, this card can be installed in slots 4 to 9.

Functions and Features

Table 7-146 describes the functions and features of a 2X10GL card.

Table 7-146 Functions and features

Function and Feature

Description

Two 10GE optical interfaces

The card provides 10G access to the WAN to implement Layer 3 services.

The two 10GE optical interfaces provide 10 Gbit/s line-rate transmission to the upstream network.

Layer 3 protocols

IPv4, IPv6, and MPLS.

Panel

Figure 7-61 shows the indicators on a 2X10GL card, and Table 7-147 describes the indicator states and meanings.

Figure 7-61 Indicators on a 2X10GL card
Table 7-147 Indicator description

Number

Indicator

Color

Description

0

LINK/ACT

Green

Steady on: A link has been established on 10GE/0.

Blinking: Data is being transmitted or received on 10GE/0.

Off: No link is established on 10GE/0.

1

LINK/ACT

Green

Steady on: A link has been established on 10GE/1.

Blinking: Data is being transmitted or received on 10GE/1.

Off: No link is established on 10GE/1.

Figure 7-62 shows the interfaces on a 2X10GL card.

Figure 7-62 Interfaces on a 2X10GL card

1. Two 10GE optical interfaces

10GE optical interface

The 10GE optical interfaces cannot work in GE mode and can only transmit and receive service traffic at 10 Gbit/s. Table 7-148 lists attributes of a 10GE optical interface.
Table 7-148 10GE optical interface attributes

Attribute

Description

Connector type

LC/PC

Optical interface attributes

The optical interface attributes vary depending on the optical module used. For details, see 10GE SFP+ Optical Modules.

Standards compliance

IEEE802.3ae

Technical Specifications

Table 7-149 lists the technical specifications of a 2X10GL card.

Table 7-149 Technical specifications

Item

Specifications

Card type

WSIC

Hot swap

Supported

Physical specifications
  • Dimensions (H x W x D): 19.82 mm x 201 mm x 223.5 mm (0.78 in. x 7.91 in. x 8.80 in.)
  • Maximum power consumption: 25 W
  • Weight: 0.5 kg (1.1 lb)

Environment parameters
  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% to 95%, noncondensing
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Operating altitude: 0 to 5000 m (16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-150 provides 2X10GL card ordering information.

Table 7-150 Ordering information

Part Number

Model

Name Label (Silkscreen)

Description

03022STN

AR-2X10GL-W

2X10GL

2-Port 10GE Optical Ports Interface Card
Translation
简体中文
Download
Updated: 2023-08-08

Document ID: EDOC1000009848

Views: 1761693

Downloads: 19217

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :