How to Identify Huawei-Certified Optical Modules
Huawei routers must use Huawei-certified optical modules. Non-Huawei-certified optical modules cannot ensure transmission reliability and may affect service stability. Huawei is not responsible for any problem caused by the use of non-Huawei-certified optical modules and will not fix such problems.
The methods provided here are only for reference. To confirm whether optical modules you use have been certified by Huawei, contact technical support personnel.
If the optical modules you use are delivered after July 1, 2013, use either of the following methods to determine whether they have been certified by Huawei.
Method 1: Check for "HUAWEI" on the Label
If an optical module has been certified by Huawei, its label contains "HUAWEI", as shown in Figure 9-1.
Method 2: Run the display transceiver Command
If an optical module meets the following conditions, it has been certified by Huawei. Otherwise, the optical module is not a Huawei-certified one.
In the display elabel command output, the Manufactured field displays a date later than 2013-07-01.
In the display version command output, the display version is V200R001C00 or later.
In the display transceiver command output, the Manufacturing Date field displays a date later than 2013-07-01, and the Vendor Name field displays HUAWEI.
<Huawei> display transceiver XGigabitEthernet2/0/0 transceiver information: ------------------------------------------------------------- Common information: Transceiver Type :XFP-STM64-LX-SM1310 Connector Type :LC Wavelength(nm) :1310 Transfer Distance(m) :100000(9um) Digital Diagnostic Monitoring :YES Vendor Name :HUAWEI Vendor Part Number :02315208 Ordering Name : ------------------------------------------------------------- Manufacture information: Manu. Serial Number :210231520810E4000803 Manufacturing Date :2013-09-11 Vendor Name :HUAWEI