1E1/T1-F (1-Port Fractional Channelized E1/T1 WAN Interface Card)

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 Hardware Description

This document describes hardware components of the AR, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about AR hardware components from this document.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

1E1/T1-F (1-Port Fractional Channelized E1/T1 WAN Interface Card)

Card Overview

The 1E1/T1-F is a data and image signal processing module for a router and provides one E1/T1-F interface for WAN connection.

A 1E1/T1-F card can be installed in a SIC slot of a router.

Figure 7-84 shows the appearance of a 1E1/T1-F card.

Figure 7-84 1E1/T1-F card appearance

Version Mapping

Table 7-197 lists the device models and software versions supporting the 1E1/T1-F.

Table 7-197 Version mapping

Card Name	Device Model
1E1/T1-F NOTE: This card is supported in V200R001C01 and later versions.	AR1200 series AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE) AR3200 series AR3600 series

Card Name

Device Model

1E1/T1-F

NOTE:

This card is supported in V200R001C01 and later versions.

AR1200 series

AR2200 series (All models in this series except the AR2201-48FE and AR2202-48FE)

AR3200 series

AR3600 series

Functions and Features

Table 7-198 describes the functions and features of a 1E1/T1-F card.

Table 7-198 Functions and features

Function and Feature	Description
Data transmission	Connects to a WAN through E1-F interface to complete data transmission.
Data transmission	A fractional channelized E1 line allows 31 timeslots to be flexibly bundled, but only one bundled channel is supported. The interface rate is 64 kbit/s multiplied by n, where n is the number of timeslots in the bundle and ranges from 1 to 31.
Service communication	In unframed mode, an E1 line provides 2 Mbit/s bandwidth for service traffic transmission without timeslot division. In framed mode, an E1 line is divided into 32 timeslots. Multiple timeslots can be bundled into a low-speed E1 channel for service traffic transmission.
Cost-effective access service	Compared with a channelized E1/T1 interface card, a fractional channelized E1/T1 interface card provides the access service at lower cost.

Panel

Figure 7-85 shows the indicators on a 1E1/T1-F card, and Table 7-199 describes the indicator states and meanings.

Figure 7-85 Indicators on a 1E1/T1-F card
Click to enlarge

Table 7-199 Indicator description

Number	Indicator	Color	Description
1	STAT	Green	Slow blinking: The system is running properly. Fast blinking: The system is being powered on or restarting.
		Red	Steady on: A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually.
		Off	The system software is not running or is resetting.
2	LINK/ACT	Green	Steady on: A link has been established on the interface. Off: No link is established on the interface.
		Amber	Blinking: Data is being transmitted or received on the interface. Off: No data is being transmitted or received on the interface.
		Off	The interface is not connected

Figure 7-86 shows the interface on a 1E1/T1-F card.

Figure 7-86 Interface on a 1E1/T1-F card
Click to enlarge

1. One E1/T1-F interface

E1-F interface (fractional channelized)

An E1-F interface transmits data and image signals. Table 7-200 lists attributes of an E1-F interface.

Table 7-200 E1-F interface attributes

Attribute	Description
Connector type	DB9
Standards compliance	G.703, G.704
Interface rate	2.048 Mbit/s
Working mode	Fractional channelized E1
Cable type	E1/T1 Cable

T1-F interface (fractional channelized)

A T1-F interface transmits data and image signals. Table 7-201 lists attributes of a T1-F interface.

Table 7-201 T1-F interface attributes

Attribute	Description
Connector type	DB9
Standards compliance	G.703, G.704
Interface rate	1.544 Mbit/s
Working mode	Fractional channelized T1
Cable type	100-Ohm DB9-to-RJ45 Cable (Dedicated for T1)

Technical Specifications

Table 7-202 lists the technical specifications of a 1E1/T1-F card.

Table 7-202 Technical specifications

Item	Specification
Card type	SIC
Hot swap	Supported
Physical specifications	Dimensions (H x W x D): 19.82 mm x 100.1 mm x 223.5 mm (0.78 in. x 3.94 in. x 8.80 in.) Maximum power consumption: 6 W Weight: 0.3 kg (0.66 lb)
Environment parameters	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% to 95%, noncondensing Storage temperature: -40°C to +70°C (-40°F to +158°F) Operating altitude: 0 m to 5000 m (0 ft. to 16404.2 ft.)

Ordering Information

To place an order, visit https://e.huawei.com/en/how-to-buy to find the local supplier or submit your inquiries online.

Table 7-203 provides 1E1/T1-F card ordering information.

Table 7-203 Ordering information

Part Number	Model	Name Label (Silkscreen)	Description
03020YNT	AR0MSDE11A00	1E1/T1-F	1-Port Fractional Channelized E1/T1 WAN Interface Card

Card Overview
Version Mapping
Functions and Features
Panel
Technical Specifications
Ordering Information

Translation

简体中文

Download

Updated: 2023-08-08

Document ID: EDOC1000009848

Downloads: 19188

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate